Onewheel.Wiki - User contributions [en]

Charging on-the-go

2017-09-22T18:51:21Z

Ianjohnson: /* DC Battery Pack */

'''<pre style="color: red">Use at your own risk. I am not responsible if you break your Onewheel, injure yourself, someone else, or burn your house down.</pre>'''

== Overview of options ==
You have to choose what’s most important to you. Every option has tradeoffs on price, weight, capacity, and safety.

{| class="wikitable"
! Option
! Pros
! Cons
|-
| [[#DC battery pack|DC battery pack (e.g. solar charger)]]
|
# Lightest solution
# Most energy efficient (DC->DC)
# Lots of battery choices
|
# The cheapest DIY solution is the most technical. Requires soldering.
# Safety is dependent on batteries used
|-
| [[#AC battery pack|AC battery pack (e.g. Chafon)]]
|
# Most common solution
# Safe
# Includes multiple USB ports and outlets
|
# Heavy (7lbs w/ battery and charger)
# You must carry charger too
# AC->DC is inefficient from energy perspective
# Expensive ($300+)
# Battery capacity readings are wildly inaccurate
|-
| Car inverter
|
# Lots of options on the market
# Don’t have to carry anything while riding
# Safe
|
# Must be at your car to charge
# Need to make sure it can handle 300W load
|}

== Onewheel specs ==
* Charger output: 58V 3.5A
* Charger capacity: 130Wh
* Wattage required to charge: 250-300W

== Commercial Solutions ==

=== DC Battery Pack ===
[[File:Carvepower_Charger.jpg|frameless|400x400px]]

DC Charger from Carvepower- https://carvepower.com/products/dc-charger-for-onewheel

This charger uses a 36v 4.4ah hoverboard battery to charge the Onewheel. A solar charge controller boosts the output of the battery to the 58V 3.5A required by the Onewheel. One battery provides one charge, and the Onewheel wall charger is not necessary. A separate AC charger is provided to recharge the portable battery. The controller is attached to a mount which slides on to the battery case, making it easy to switch between multiple batteries. The total weight of the controller and one battery is 4lbs.

The battery itself is not included in the kit, but can be purchased separately. Currently the best price available is from this EBay seller- http://www.ebay.com/itm/NEW-SAMSUNG-18650-36V-4-4AH-BATTERY-EBIKE-VAPE-POWERWALL-BATTERIES-20-CELLS-BMS-/201895735309?epid=1621923126&hash=item2f01ec700d:g:Mh8AAOSwSypY9Y7d

Carvepower DC Charger instructions- https://www.dropbox.com/s/hkt86dyslpq5cyb/DC%20Charger%20Instructions.pdf?dl=0

=== AC battery pack ===
The idea is to use an AC battery pack with the standard [[Onewheel charger]].

[[File:Ac_inverter.png]]

{| class="wikitable"
! Option
! Pros
! Cons
|-
| [http://amzn.to/2skjq8B Chafon CF-UPS008] 
$290 for 2 charges (288Wh)
|
# Most common option in community
|
# Modified sine wave
# Heavy - 7lbs
|-
|
[http://amzn.to/2sk9ITK igoeshopping] 
$311 for 2 charges (288Wh)
|
# Pure sine wave
|
# Heavy - 7lbs
|-
|
[http://amzn.to/2sxo0Rp AMSU] 
$300 for 2.5 charges (330Wh)
|
# Pure sine wave
|
# Heavy - 7lbs
|}

== DIY DC battery pack ==
The idea is to use a solar charge controller to upconvert a portable battery’s voltage to the 58V that the Onewheel expects. The solar charge controller is typically used to charge a battery via a solar panel. However in this case, your portable battery takes place of the solar panel and your Onewheel is the battery you’re charging.

See photo from @timvp below:
[[File:charger_setup.png]]

Make sure you protect your battery with something soft in case you wipeout while riding. I suggest packing foam.

=== Step 1: choose a battery and charger ===

{| class="wikitable"
! Battery options
! Specs
! Pros
! Cons
|-
| [http://www.ebay.com/itm/36V-12-5Ah-Lithium-Battery-W-Charger-For-Mountain-Bike-Scooter-Motor-DIY-Kits-/292009928107 36V 12.5Ah Lithium Scooter battery]
| $209 for 3.5 charges (450Wh) @ 5lbs
|
# Most bang for buck in terms of cost and capacity
# AC charger included
# Safe since it's LiOn
|
# No BMS
|-
| [http://www.ebay.com/p/36v-4-4ah-Replacement-Lithium-Ion-Battery-for-Smart-Board-2-wheel-Scooter/1180968277 36V 4.4ah Lithium batteries from eBay]
| $60 for ~1 charge (158Wh)
|
# Cheap ($60)
# A couple folks in the community have had luck with this
|
# [https://batterybro.com/blogs/18650-wholesale-battery-reviews/30828867-is-it-a-fake-18650-battery-featuring-the-samsung-25r Lots of fakes]
|-
| [https://hobbyking.com/en_us/zippy-flightmax-4200mah-3s1p-30c-lifepo4-pack.html LiFePO4]
| $35 for ½ charge (42Wh?) @ 1lb
|
# Safe. This is the same kind of battery that the Onewheel uses.
|
# Less than one charge
|-
| [https://lunacycle.com/52v-mighty-mini-cube-ebike-battery-pack-panasonic-pf-5-8ah-affordable/ 52V Mighty Mini]
| $230 for 2.5 charges (300Wh) @ 3.3lb
|
# Safe
# It should be possible to charge it with stock OW charger (to be confirmed)
|
# Unsure how to upconvert 52V to 58V as the solar charger doesn’t support 52V as input
|-
| [https://jet.com/product/detail/9483763f3ec948939e5cf3c12294c362 Lithium battery from Jet.com]
| $129 for ~1 charge (158Wh) @ 2.6lbs
|
# Safe (UL certified supposedly)
# Can be charged with LunaCycle charger
|
# [https://en.wikipedia.org/wiki/Battery_management_system No BMS]
|-
| [http://www.ebikes.ca/shop/electric-bicycle-parts/batteries/b362-7-ligo.html 36V LiGo]
| $150 for <1 charge (98Wh) @ 1.3lbs
|
# Safe w/ BMS
# Lightweight
# Can be charged with LunaCycle charger
# Designed to be rugged
|
# Less than one charge
|}

You also need a way to charge your portable battery.
{| class="wikitable"
! Charger options
! Pros
! Cons
|-
| [https://lunacycle.com/36v-4amp-luna-mini-charger/ LunaCycle charger]
|
# Cheap ($60)
# Safe because it auto-shuts off
# XT60 connector
|
|-
| AC → DC charger
|
# Uses off the shelf power supply
|
# Requires [http://www.ebay.com/itm/12v-DC-Barrel-F-to-XT-60-M-Lipo-Battery-Charger-Power-Adapter-B5-/142329251634?_trksid=p2385738.m2548.l4275 DC Barrel to XT60 connector]
|-
| [https://hobbyking.com/en_us/accuell-s60-ac-charger-us-plug.html LiFePO4 charger]
|
# Cheap ($30)
|
|}

To be safe, buy a [http://amzn.to/2s2tXGy battery pouch] and only charge when you’re near the charger and awake.

=== Step 2: buy the other parts ===
# [http://amzn.to/2thPS8I Solar charge controller] - $40
[[File:charge_controller.png]]
# [https://lunacycle.com/batteries/connectors/xt60-set-connectors-with-pigtails/ 2x XT60 pigtails] - $3 each
[[File:xt60_pigtails.png]]
# [http://www.markertek.com/product/nc3fx/neutrik-nc3fx-female-3-pin-xlr-connector-nickel-silver XLR plug] - $3
[[File:xlr_plug.png]]

=== Step 3: configure the solar charge controller ===
The output of the solar charge controller must match the output of the [[Onewheel charger]]. Your settings should look something like the photo below.

[[File:controller_config.png]]

The critical settings are the 58V and 3.5A. Set the first line (where it says 32.5V) to the minimum voltage of your battery. 32V is generally a safe setting for a 36V-rated battery.

Remember! The battery pack should be on the solar panel label and OW on the battery label on the solar charge controller.

The manual can be found [http://www.mhinstek.com/pdf/User's%20manual%20of%20MPT-7210A.pdf here].

=== Step 4: solder the wires to the XLR plug ===
The Onewheel’s XLR plug requires a different wiring than the off-the-shelf XLR plugs. Unfortunately, that means you have to do some soldering.

Below is the correct configuration. Notice the positive wire is connected to *both* pins 2 and 3 of the XLR plug. If you want to verify this yourself, you can easily open the Onewheel charger’s XLR plug.

[[File:xlr_solder.png]]

=== Step 5: hook it all up! ===
Portable battery → male XT60 pigtail → solar charge converter → female XT60 pigtail → male XT60 pigtail → soldered XLR plug → (wait until voltage reaches 58V before plugging in!) Onewheel

Sometimes the OW does not go into its charge mode automatically. Simply press the power button in this case.

When you’re done charging, I suggest turning off the solar charge converter first before unplugging anything. Then disconnect the battery. Then unplug from Onewheel.

Charging Onewheel to 100% is safe. You’ll see the amps ramp down on the solar charge converter display as you enter “trickle charge” mode. But you’ll want to disconnect soon or it’ll just slowly drain your battery.

Charging on-the-go

2017-09-22T18:50:53Z

Ianjohnson: /* DC Battery Pack */

'''<pre style="color: red">Use at your own risk. I am not responsible if you break your Onewheel, injure yourself, someone else, or burn your house down.</pre>'''

== Overview of options ==
You have to choose what’s most important to you. Every option has tradeoffs on price, weight, capacity, and safety.

{| class="wikitable"
! Option
! Pros
! Cons
|-
| [[#DC battery pack|DC battery pack (e.g. solar charger)]]
|
# Lightest solution
# Most energy efficient (DC->DC)
# Lots of battery choices
|
# The cheapest DIY solution is the most technical. Requires soldering.
# Safety is dependent on batteries used
|-
| [[#AC battery pack|AC battery pack (e.g. Chafon)]]
|
# Most common solution
# Safe
# Includes multiple USB ports and outlets
|
# Heavy (7lbs w/ battery and charger)
# You must carry charger too
# AC->DC is inefficient from energy perspective
# Expensive ($300+)
# Battery capacity readings are wildly inaccurate
|-
| Car inverter
|
# Lots of options on the market
# Don’t have to carry anything while riding
# Safe
|
# Must be at your car to charge
# Need to make sure it can handle 300W load
|}

== Onewheel specs ==
* Charger output: 58V 3.5A
* Charger capacity: 130Wh
* Wattage required to charge: 250-300W

== Commercial Solutions ==

=== DC Battery Pack ===
[[File:Carvepower_Charger.jpg|frameless|400x400px]]DC Charger from Carvepower- https://carvepower.com/products/dc-charger-for-onewheel

This charger uses a 36v 4.4ah hoverboard battery to charge the Onewheel. A solar charge controller boosts the output of the battery to the 58V 3.5A required by the Onewheel. One battery provides one charge, and the Onewheel wall charger is not necessary. A separate AC charger is provided to recharge the portable battery. The controller is attached to a mount which slides on to the battery case, making it easy to switch between multiple batteries. The total weight of the controller and one battery is 4lbs.

The battery itself is not included in the kit, but can be purchased separately. Currently the best price available is from this EBay seller- http://www.ebay.com/itm/NEW-SAMSUNG-18650-36V-4-4AH-BATTERY-EBIKE-VAPE-POWERWALL-BATTERIES-20-CELLS-BMS-/201895735309?epid=1621923126&hash=item2f01ec700d:g:Mh8AAOSwSypY9Y7d

Carvepower DC Charger instructions- https://www.dropbox.com/s/hkt86dyslpq5cyb/DC%20Charger%20Instructions.pdf?dl=0

=== AC battery pack ===
The idea is to use an AC battery pack with the standard [[Onewheel charger]].

[[File:Ac_inverter.png]]

{| class="wikitable"
! Option
! Pros
! Cons
|-
| [http://amzn.to/2skjq8B Chafon CF-UPS008] 
$290 for 2 charges (288Wh)
|
# Most common option in community
|
# Modified sine wave
# Heavy - 7lbs
|-
|
[http://amzn.to/2sk9ITK igoeshopping] 
$311 for 2 charges (288Wh)
|
# Pure sine wave
|
# Heavy - 7lbs
|-
|
[http://amzn.to/2sxo0Rp AMSU] 
$300 for 2.5 charges (330Wh)
|
# Pure sine wave
|
# Heavy - 7lbs
|}

== DIY DC battery pack ==
The idea is to use a solar charge controller to upconvert a portable battery’s voltage to the 58V that the Onewheel expects. The solar charge controller is typically used to charge a battery via a solar panel. However in this case, your portable battery takes place of the solar panel and your Onewheel is the battery you’re charging.

See photo from @timvp below:
[[File:charger_setup.png]]

Make sure you protect your battery with something soft in case you wipeout while riding. I suggest packing foam.

=== Step 1: choose a battery and charger ===

{| class="wikitable"
! Battery options
! Specs
! Pros
! Cons
|-
| [http://www.ebay.com/itm/36V-12-5Ah-Lithium-Battery-W-Charger-For-Mountain-Bike-Scooter-Motor-DIY-Kits-/292009928107 36V 12.5Ah Lithium Scooter battery]
| $209 for 3.5 charges (450Wh) @ 5lbs
|
# Most bang for buck in terms of cost and capacity
# AC charger included
# Safe since it's LiOn
|
# No BMS
|-
| [http://www.ebay.com/p/36v-4-4ah-Replacement-Lithium-Ion-Battery-for-Smart-Board-2-wheel-Scooter/1180968277 36V 4.4ah Lithium batteries from eBay]
| $60 for ~1 charge (158Wh)
|
# Cheap ($60)
# A couple folks in the community have had luck with this
|
# [https://batterybro.com/blogs/18650-wholesale-battery-reviews/30828867-is-it-a-fake-18650-battery-featuring-the-samsung-25r Lots of fakes]
|-
| [https://hobbyking.com/en_us/zippy-flightmax-4200mah-3s1p-30c-lifepo4-pack.html LiFePO4]
| $35 for ½ charge (42Wh?) @ 1lb
|
# Safe. This is the same kind of battery that the Onewheel uses.
|
# Less than one charge
|-
| [https://lunacycle.com/52v-mighty-mini-cube-ebike-battery-pack-panasonic-pf-5-8ah-affordable/ 52V Mighty Mini]
| $230 for 2.5 charges (300Wh) @ 3.3lb
|
# Safe
# It should be possible to charge it with stock OW charger (to be confirmed)
|
# Unsure how to upconvert 52V to 58V as the solar charger doesn’t support 52V as input
|-
| [https://jet.com/product/detail/9483763f3ec948939e5cf3c12294c362 Lithium battery from Jet.com]
| $129 for ~1 charge (158Wh) @ 2.6lbs
|
# Safe (UL certified supposedly)
# Can be charged with LunaCycle charger
|
# [https://en.wikipedia.org/wiki/Battery_management_system No BMS]
|-
| [http://www.ebikes.ca/shop/electric-bicycle-parts/batteries/b362-7-ligo.html 36V LiGo]
| $150 for <1 charge (98Wh) @ 1.3lbs
|
# Safe w/ BMS
# Lightweight
# Can be charged with LunaCycle charger
# Designed to be rugged
|
# Less than one charge
|}

You also need a way to charge your portable battery.
{| class="wikitable"
! Charger options
! Pros
! Cons
|-
| [https://lunacycle.com/36v-4amp-luna-mini-charger/ LunaCycle charger]
|
# Cheap ($60)
# Safe because it auto-shuts off
# XT60 connector
|
|-
| AC → DC charger
|
# Uses off the shelf power supply
|
# Requires [http://www.ebay.com/itm/12v-DC-Barrel-F-to-XT-60-M-Lipo-Battery-Charger-Power-Adapter-B5-/142329251634?_trksid=p2385738.m2548.l4275 DC Barrel to XT60 connector]
|-
| [https://hobbyking.com/en_us/accuell-s60-ac-charger-us-plug.html LiFePO4 charger]
|
# Cheap ($30)
|
|}

To be safe, buy a [http://amzn.to/2s2tXGy battery pouch] and only charge when you’re near the charger and awake.

=== Step 2: buy the other parts ===
# [http://amzn.to/2thPS8I Solar charge controller] - $40
[[File:charge_controller.png]]
# [https://lunacycle.com/batteries/connectors/xt60-set-connectors-with-pigtails/ 2x XT60 pigtails] - $3 each
[[File:xt60_pigtails.png]]
# [http://www.markertek.com/product/nc3fx/neutrik-nc3fx-female-3-pin-xlr-connector-nickel-silver XLR plug] - $3
[[File:xlr_plug.png]]

=== Step 3: configure the solar charge controller ===
The output of the solar charge controller must match the output of the [[Onewheel charger]]. Your settings should look something like the photo below.

[[File:controller_config.png]]

The critical settings are the 58V and 3.5A. Set the first line (where it says 32.5V) to the minimum voltage of your battery. 32V is generally a safe setting for a 36V-rated battery.

Remember! The battery pack should be on the solar panel label and OW on the battery label on the solar charge controller.

The manual can be found [http://www.mhinstek.com/pdf/User's%20manual%20of%20MPT-7210A.pdf here].

=== Step 4: solder the wires to the XLR plug ===
The Onewheel’s XLR plug requires a different wiring than the off-the-shelf XLR plugs. Unfortunately, that means you have to do some soldering.

Below is the correct configuration. Notice the positive wire is connected to *both* pins 2 and 3 of the XLR plug. If you want to verify this yourself, you can easily open the Onewheel charger’s XLR plug.

[[File:xlr_solder.png]]

=== Step 5: hook it all up! ===
Portable battery → male XT60 pigtail → solar charge converter → female XT60 pigtail → male XT60 pigtail → soldered XLR plug → (wait until voltage reaches 58V before plugging in!) Onewheel

Sometimes the OW does not go into its charge mode automatically. Simply press the power button in this case.

When you’re done charging, I suggest turning off the solar charge converter first before unplugging anything. Then disconnect the battery. Then unplug from Onewheel.

Charging Onewheel to 100% is safe. You’ll see the amps ramp down on the solar charge converter display as you enter “trickle charge” mode. But you’ll want to disconnect soon or it’ll just slowly drain your battery.

Charging on-the-go

2017-09-22T18:48:57Z

Ianjohnson: Added Carvepower DC charger, changed to order to put DC solutions before AC solutions and a separate section for DIY

'''<pre style="color: red">Use at your own risk. I am not responsible if you break your Onewheel, injure yourself, someone else, or burn your house down.</pre>'''

== Overview of options ==
You have to choose what’s most important to you. Every option has tradeoffs on price, weight, capacity, and safety.

{| class="wikitable"
! Option
! Pros
! Cons
|-
| [[#DC battery pack|DC battery pack (e.g. solar charger)]]
|
# Lightest solution
# Most energy efficient (DC->DC)
# Lots of battery choices
|
# The cheapest DIY solution is the most technical. Requires soldering.
# Safety is dependent on batteries used
|-
| [[#AC battery pack|AC battery pack (e.g. Chafon)]]
|
# Most common solution
# Safe
# Includes multiple USB ports and outlets
|
# Heavy (7lbs w/ battery and charger)
# You must carry charger too
# AC->DC is inefficient from energy perspective
# Expensive ($300+)
# Battery capacity readings are wildly inaccurate
|-
| Car inverter
|
# Lots of options on the market
# Don’t have to carry anything while riding
# Safe
|
# Must be at your car to charge
# Need to make sure it can handle 300W load
|}

== Onewheel specs ==
* Charger output: 58V 3.5A
* Charger capacity: 130Wh
* Wattage required to charge: 250-300W

== Commercial Solutions ==

=== DC Battery Pack ===
[[File:Carvepower Charger.jpg|left|frameless|400x400px]]

DC Charger from Carvepower- https://carvepower.com/products/dc-charger-for-onewheel

This charger uses a 36v 4.4ah hoverboard battery to charge the Onewheel. A solar charge controller boosts the output of the battery to the 58V 3.5A required by the Onewheel. One battery provides one charge, and the Onewheel wall charger is not necessary. A separate AC charger is provided to recharge the portable battery. The controller is attached to a mount which slides on to the battery case, making it easy to switch between multiple batteries. The total weight of the controller and one battery is 4lbs.

The battery itself is not included in the kit, but can be purchased separately. Currently the best price available is from this EBay seller- http://www.ebay.com/itm/NEW-SAMSUNG-18650-36V-4-4AH-BATTERY-EBIKE-VAPE-POWERWALL-BATTERIES-20-CELLS-BMS-/201895735309?epid=1621923126&hash=item2f01ec700d:g:Mh8AAOSwSypY9Y7d

Carvepower DC Charger instructions- https://www.dropbox.com/s/hkt86dyslpq5cyb/DC%20Charger%20Instructions.pdf?dl=0

=== AC battery pack ===
The idea is to use an AC battery pack with the standard [[Onewheel charger]].

[[File:Ac_inverter.png]]

{| class="wikitable"
! Option
! Pros
! Cons
|-
| [http://amzn.to/2skjq8B Chafon CF-UPS008] 
$290 for 2 charges (288Wh)
|
# Most common option in community
|
# Modified sine wave
# Heavy - 7lbs
|-
|
[http://amzn.to/2sk9ITK igoeshopping] 
$311 for 2 charges (288Wh)
|
# Pure sine wave
|
# Heavy - 7lbs
|-
|
[http://amzn.to/2sxo0Rp AMSU] 
$300 for 2.5 charges (330Wh)
|
# Pure sine wave
|
# Heavy - 7lbs
|}

== DIY DC battery pack ==
The idea is to use a solar charge controller to upconvert a portable battery’s voltage to the 58V that the Onewheel expects. The solar charge controller is typically used to charge a battery via a solar panel. However in this case, your portable battery takes place of the solar panel and your Onewheel is the battery you’re charging.

See photo from @timvp below:
[[File:charger_setup.png]]

Make sure you protect your battery with something soft in case you wipeout while riding. I suggest packing foam.

=== Step 1: choose a battery and charger ===

{| class="wikitable"
! Battery options
! Specs
! Pros
! Cons
|-
| [http://www.ebay.com/itm/36V-12-5Ah-Lithium-Battery-W-Charger-For-Mountain-Bike-Scooter-Motor-DIY-Kits-/292009928107 36V 12.5Ah Lithium Scooter battery]
| $209 for 3.5 charges (450Wh) @ 5lbs
|
# Most bang for buck in terms of cost and capacity
# AC charger included
# Safe since it's LiOn
|
# No BMS
|-
| [http://www.ebay.com/p/36v-4-4ah-Replacement-Lithium-Ion-Battery-for-Smart-Board-2-wheel-Scooter/1180968277 36V 4.4ah Lithium batteries from eBay]
| $60 for ~1 charge (158Wh)
|
# Cheap ($60)
# A couple folks in the community have had luck with this
|
# [https://batterybro.com/blogs/18650-wholesale-battery-reviews/30828867-is-it-a-fake-18650-battery-featuring-the-samsung-25r Lots of fakes]
|-
| [https://hobbyking.com/en_us/zippy-flightmax-4200mah-3s1p-30c-lifepo4-pack.html LiFePO4]
| $35 for ½ charge (42Wh?) @ 1lb
|
# Safe. This is the same kind of battery that the Onewheel uses.
|
# Less than one charge
|-
| [https://lunacycle.com/52v-mighty-mini-cube-ebike-battery-pack-panasonic-pf-5-8ah-affordable/ 52V Mighty Mini]
| $230 for 2.5 charges (300Wh) @ 3.3lb
|
# Safe
# It should be possible to charge it with stock OW charger (to be confirmed)
|
# Unsure how to upconvert 52V to 58V as the solar charger doesn’t support 52V as input
|-
| [https://jet.com/product/detail/9483763f3ec948939e5cf3c12294c362 Lithium battery from Jet.com]
| $129 for ~1 charge (158Wh) @ 2.6lbs
|
# Safe (UL certified supposedly)
# Can be charged with LunaCycle charger
|
# [https://en.wikipedia.org/wiki/Battery_management_system No BMS]
|-
| [http://www.ebikes.ca/shop/electric-bicycle-parts/batteries/b362-7-ligo.html 36V LiGo]
| $150 for <1 charge (98Wh) @ 1.3lbs
|
# Safe w/ BMS
# Lightweight
# Can be charged with LunaCycle charger
# Designed to be rugged
|
# Less than one charge
|}

You also need a way to charge your portable battery.
{| class="wikitable"
! Charger options
! Pros
! Cons
|-
| [https://lunacycle.com/36v-4amp-luna-mini-charger/ LunaCycle charger]
|
# Cheap ($60)
# Safe because it auto-shuts off
# XT60 connector
|
|-
| AC → DC charger
|
# Uses off the shelf power supply
|
# Requires [http://www.ebay.com/itm/12v-DC-Barrel-F-to-XT-60-M-Lipo-Battery-Charger-Power-Adapter-B5-/142329251634?_trksid=p2385738.m2548.l4275 DC Barrel to XT60 connector]
|-
| [https://hobbyking.com/en_us/accuell-s60-ac-charger-us-plug.html LiFePO4 charger]
|
# Cheap ($30)
|
|}

To be safe, buy a [http://amzn.to/2s2tXGy battery pouch] and only charge when you’re near the charger and awake.

=== Step 2: buy the other parts ===
# [http://amzn.to/2thPS8I Solar charge controller] - $40
[[File:charge_controller.png]]
# [https://lunacycle.com/batteries/connectors/xt60-set-connectors-with-pigtails/ 2x XT60 pigtails] - $3 each
[[File:xt60_pigtails.png]]
# [http://www.markertek.com/product/nc3fx/neutrik-nc3fx-female-3-pin-xlr-connector-nickel-silver XLR plug] - $3
[[File:xlr_plug.png]]

=== Step 3: configure the solar charge controller ===
The output of the solar charge controller must match the output of the [[Onewheel charger]]. Your settings should look something like the photo below.

[[File:controller_config.png]]

The critical settings are the 58V and 3.5A. Set the first line (where it says 32.5V) to the minimum voltage of your battery. 32V is generally a safe setting for a 36V-rated battery.

Remember! The battery pack should be on the solar panel label and OW on the battery label on the solar charge controller.

The manual can be found [http://www.mhinstek.com/pdf/User's%20manual%20of%20MPT-7210A.pdf here].

=== Step 4: solder the wires to the XLR plug ===
The Onewheel’s XLR plug requires a different wiring than the off-the-shelf XLR plugs. Unfortunately, that means you have to do some soldering.

Below is the correct configuration. Notice the positive wire is connected to *both* pins 2 and 3 of the XLR plug. If you want to verify this yourself, you can easily open the Onewheel charger’s XLR plug.

[[File:xlr_solder.png]]

=== Step 5: hook it all up! ===
Portable battery → male XT60 pigtail → solar charge converter → female XT60 pigtail → male XT60 pigtail → soldered XLR plug → (wait until voltage reaches 58V before plugging in!) Onewheel

Sometimes the OW does not go into its charge mode automatically. Simply press the power button in this case.

When you’re done charging, I suggest turning off the solar charge converter first before unplugging anything. Then disconnect the battery. Then unplug from Onewheel.

Charging Onewheel to 100% is safe. You’ll see the amps ramp down on the solar charge converter display as you enter “trickle charge” mode. But you’ll want to disconnect soon or it’ll just slowly drain your battery.

File:Carvepower Charger.jpg

2017-09-22T18:26:27Z

Ianjohnson:

Carvepower DC Charger for Onewheel

Charging on-the-go

2017-09-21T21:54:54Z

Ianjohnson: /* AC battery pack */

'''<pre style="color: red">Use at your own risk. I am not responsible if you break your Onewheel, injure yourself, someone else, or burn your house down.</pre>'''

== Overview of options ==
You have to choose what’s most important to you. Every option has tradeoffs on price, weight, capacity, and safety.

{| class="wikitable"
! Option
! Pros
! Cons
|-
| Car inverter
|
# Lots of options on the market
# Don’t have to carry anything while riding
# Safe
|
# Must be at your car to charge
# Need to make sure it can handle 300W load
|-
| [[#AC battery pack|AC battery pack (e.g. Chafon)]]
|
# Most common solution
# Safe
# Includes multiple USB ports and outlets
|
# Heavy (7lbs w/ battery and charger)
# You must carry charger too
# AC->DC is inefficient from energy perspective
# Expensive ($300+)
# Battery capacity readings are wildly inaccurate
|-
| [[#DC battery pack|DC battery pack (e.g. solar charger)]]
|
# Lightest solution
# Most energy efficient (DC->DC)
# Lots of battery choices
|
# Most technical. Requires soldering.
# Safety is dependent on batteries used
|}

== Onewheel specs ==
* Charger output: 58V 3.5A
* Charger capacity: 130Wh
* Wattage required to charge: 250-300W

== AC battery pack ==
The idea is to use an AC battery pack with the standard [[Onewheel charger]].

[[File:Ac_inverter.png]]

{| class="wikitable"
! Option
! Pros
! Cons
|-
| [http://amzn.to/2skjq8B Chafon CF-UPS008] 
$290 for 2 charges (288Wh)
|
# Most common option in community
|
# Modified sine wave
# Heavy - 7lbs
|-
|
[http://amzn.to/2sk9ITK igoeshopping] 
$311 for 2 charges (288Wh)
|
# Pure sine wave
|
# Heavy - 7lbs
|-
|
[http://amzn.to/2sxo0Rp AMSU] 
$300 for 2.5 charges (330Wh)
|
# Pure sine wave
|
# Heavy - 7lbs
|}

== DC battery pack ==
The idea is to use a solar charge controller to upconvert a portable battery’s voltage to the 58V that the Onewheel expects. The solar charge controller is typically used to charge a battery via a solar panel. However in this case, your portable battery takes place of the solar panel and your Onewheel is the battery you’re charging.

See photo from @timvp below:
[[File:charger_setup.png]]

Make sure you protect your battery with something soft in case you wipeout while riding. I suggest packing foam.

=== Step 1: choose a battery and charger ===

{| class="wikitable"
! Battery options
! Specs
! Pros
! Cons
|-
| [http://www.ebay.com/itm/36V-12-5Ah-Lithium-Battery-W-Charger-For-Mountain-Bike-Scooter-Motor-DIY-Kits-/292009928107 36V 12.5Ah Lithium Scooter battery]
| $209 for 3.5 charges (450Wh) @ 5lbs
|
# Most bang for buck in terms of cost and capacity
# AC charger included
# Safe since it's LiOn
|
# No BMS
|-
| [http://www.ebay.com/p/36v-4-4ah-Replacement-Lithium-Ion-Battery-for-Smart-Board-2-wheel-Scooter/1180968277 36V 4.4ah Lithium batteries from eBay]
| $60 for ~1 charge (158Wh)
|
# Cheap ($60)
# A couple folks in the community have had luck with this
|
# [https://batterybro.com/blogs/18650-wholesale-battery-reviews/30828867-is-it-a-fake-18650-battery-featuring-the-samsung-25r Lots of fakes]
|-
| [https://hobbyking.com/en_us/zippy-flightmax-4200mah-3s1p-30c-lifepo4-pack.html LiFePO4]
| $35 for ½ charge (42Wh?) @ 1lb
|
# Safe. This is the same kind of battery that the Onewheel uses.
|
# Less than one charge
|-
| [https://lunacycle.com/52v-mighty-mini-cube-ebike-battery-pack-panasonic-pf-5-8ah-affordable/ 52V Mighty Mini]
| $230 for 2.5 charges (300Wh) @ 3.3lb
|
# Safe
# It should be possible to charge it with stock OW charger (to be confirmed)
|
# Unsure how to upconvert 52V to 58V as the solar charger doesn’t support 52V as input
|-
| [https://jet.com/product/detail/9483763f3ec948939e5cf3c12294c362 Lithium battery from Jet.com]
| $129 for ~1 charge (158Wh) @ 2.6lbs
|
# Safe (UL certified supposedly)
# Can be charged with LunaCycle charger
|
# [https://en.wikipedia.org/wiki/Battery_management_system No BMS]
|-
| [http://www.ebikes.ca/shop/electric-bicycle-parts/batteries/b362-7-ligo.html 36V LiGo]
| $150 for <1 charge (98Wh) @ 1.3lbs
|
# Safe w/ BMS
# Lightweight
# Can be charged with LunaCycle charger
# Designed to be rugged
|
# Less than one charge
|}

You also need a way to charge your portable battery.
{| class="wikitable"
! Charger options
! Pros
! Cons
|-
| [https://lunacycle.com/36v-4amp-luna-mini-charger/ LunaCycle charger]
|
# Cheap ($60)
# Safe because it auto-shuts off
# XT60 connector
|
|-
| AC → DC charger
|
# Uses off the shelf power supply
|
# Requires [http://www.ebay.com/itm/12v-DC-Barrel-F-to-XT-60-M-Lipo-Battery-Charger-Power-Adapter-B5-/142329251634?_trksid=p2385738.m2548.l4275 DC Barrel to XT60 connector]
|-
| [https://hobbyking.com/en_us/accuell-s60-ac-charger-us-plug.html LiFePO4 charger]
|
# Cheap ($30)
|
|}

To be safe, buy a [http://amzn.to/2s2tXGy battery pouch] and only charge when you’re near the charger and awake.

=== Step 2: buy the other parts ===
# [http://amzn.to/2thPS8I Solar charge controller] - $40
[[File:charge_controller.png]]
# [https://lunacycle.com/batteries/connectors/xt60-set-connectors-with-pigtails/ 2x XT60 pigtails] - $3 each
[[File:xt60_pigtails.png]]
# [http://www.markertek.com/product/nc3fx/neutrik-nc3fx-female-3-pin-xlr-connector-nickel-silver XLR plug] - $3
[[File:xlr_plug.png]]

=== Step 3: configure the solar charge controller ===
The output of the solar charge controller must match the output of the [[Onewheel charger]]. Your settings should look something like the photo below.

[[File:controller_config.png]]

The critical settings are the 58V and 3.5A. Set the first line (where it says 32.5V) to the minimum voltage of your battery. 32V is generally a safe setting for a 36V-rated battery.

Remember! The battery pack should be on the solar panel label and OW on the battery label on the solar charge controller.

The manual can be found [http://www.mhinstek.com/pdf/User's%20manual%20of%20MPT-7210A.pdf here].

=== Step 4: solder the wires to the XLR plug ===
The Onewheel’s XLR plug requires a different wiring than the off-the-shelf XLR plugs. Unfortunately, that means you have to do some soldering.

Below is the correct configuration. Notice the positive wire is connected to *both* pins 2 and 3 of the XLR plug. If you want to verify this yourself, you can easily open the Onewheel charger’s XLR plug.

[[File:xlr_solder.png]]

=== Step 5: hook it all up! ===
Portable battery → male XT60 pigtail → solar charge converter → female XT60 pigtail → male XT60 pigtail → soldered XLR plug → (wait until voltage reaches 58V before plugging in!) Onewheel

Sometimes the OW does not go into its charge mode automatically. Simply press the power button in this case.

When you’re done charging, I suggest turning off the solar charge converter first before unplugging anything. Then disconnect the battery. Then unplug from Onewheel.

Charging Onewheel to 100% is safe. You’ll see the amps ramp down on the solar charge converter display as you enter “trickle charge” mode. But you’ll want to disconnect soon or it’ll just slowly drain your battery.

Charging on-the-go

2017-06-27T19:32:05Z

Ianjohnson: Added Carvepower

'''<pre style="color: red">Use at your own risk. I am not responsible if you break your Onewheel, injure yourself, someone else, or burn your house down.</pre>'''

== Overview of options ==
You have to choose what’s most important to you. Every option has tradeoffs on price, weight, capacity, and safety.

{| class="wikitable"
! Option
! Pros
! Cons
|-
| Car inverter
|
# Lots of options on the market
# Don’t have to carry anything while riding
# Safe
|
# Must be at your car to charge
# Need to make sure it can handle 300W load
|-
| [[#AC battery pack|AC battery pack (e.g. Chafon)]]
|
# Most common solution
# Safe
# Includes multiple USB ports and outlets
|
# Heavy (10lbs w/ battery and charger)
# You must carry charger too
# AC->DC is inefficient from energy perspective
# Expensive ($300+)
# Battery capacity readings are wildly inaccurate
|-
| [[#DC battery pack|DC battery pack (e.g. solar charger)]]
|
# Lightest solution
# Most energy efficient (DC->DC)
# Lots of battery choices
|
# Most technical. Requires soldering.
# Safety is dependent on batteries used
|}

== Onewheel specs ==
* Charger output: 58V 3.5A
* Charger capacity: 130Wh
* Wattage required to charge: 250-300W

== AC battery pack ==
The idea is to use an AC battery pack with the standard Onewheel charger.

[[File:Ac_inverter.png]]

{| class="wikitable"
! Option
! Pros
! Cons
|-
|
[https://carvepower.com/products/12v-26ah-288wh-ups-and-power-bank Carvepower] 
$245 for 2 charges (288Wh)
|
# Pure sine wave
#Lower price for Onewheel community
|
# Heavy - 7lbs
|-
| [http://amzn.to/2skjq8B Chafon CF-UPS008] 
$290 for 2 charges (288Wh)
|
# Most common option in community
|
# Modified sine wave
# Heavy - 7lbs
|-
|
[http://amzn.to/2sk9ITK igoeshopping] 
$311 for 2 charges (288Wh)
|
# Pure sine wave
|
# Heavy - 7lbs
|-
|
[http://amzn.to/2sxo0Rp AMSU] 
$300 for 2.5 charges (330Wh)
|
# Pure sine wave
|
# Heavy - 7lbs
|}

== DC battery pack ==
The idea is to use a solar charge controller to upconvert a portable battery’s voltage to the 58V that the Onewheel expects. The solar charge controller is typically used to charge a battery via a solar panel. However in this case, your portable battery takes place of the solar panel and your Onewheel is the battery you’re charging.

See photo from @timvp below:
[[File:charger_setup.png]]

Make sure you protect your battery with something soft in case you wipeout while riding. I suggest packing foam.

=== Step 1: choose a battery and charger ===

{| class="wikitable"
! Battery options
! Specs
! Pros
! Cons
|-
| [http://www.ebay.com/itm/36V-12-5Ah-Lithium-Battery-W-Charger-For-Mountain-Bike-Scooter-Motor-DIY-Kits-/292009928107 36V 12.5Ah Lithium Scooter battery]
| $209 for 3.5 charges (450Wh) @ 5lbs
|
# Most bang for buck in terms of cost and capacity
# AC charger included
# Safe since it's LiOn
|
# No BMS
|-
| [http://www.ebay.com/p/36v-4-4ah-Replacement-Lithium-Ion-Battery-for-Smart-Board-2-wheel-Scooter/1180968277 36V 4.4ah Lithium batteries from eBay]
| $60 for ~1 charge (158Wh)
|
# Cheap ($60)
# A couple folks in the community have had luck with this
|
# [https://batterybro.com/blogs/18650-wholesale-battery-reviews/30828867-is-it-a-fake-18650-battery-featuring-the-samsung-25r Lots of fakes]
|-
| [https://hobbyking.com/en_us/zippy-flightmax-4200mah-3s1p-30c-lifepo4-pack.html LiFePO4]
| $35 for ½ charge (42Wh?) @ 1lb
|
# Safe. This is the same kind of battery that the Onewheel uses.
|
# Less than one charge
|-
| [https://lunacycle.com/52v-mighty-mini-cube-ebike-battery-pack-panasonic-pf-5-8ah-affordable/ 52V Mighty Mini]
| $230 for 2.5 charges (300Wh) @ 3.3lb
|
# Safe
# It should be possible to charge it with stock OW charger (to be confirmed)
|
# Unsure how to upconvert 52V to 58V as the solar charger doesn’t support 52V as input
|-
| [https://jet.com/product/detail/9483763f3ec948939e5cf3c12294c362 Lithium battery from Jet.com]
| $129 for ~1 charge (158Wh) @ 2.6lbs
|
# Safe (UL certified supposedly)
# Can be charged with LunaCycle charger
|
# [https://en.wikipedia.org/wiki/Battery_management_system No BMS]
|-
| [http://www.ebikes.ca/shop/electric-bicycle-parts/batteries/b362-7-ligo.html 36V LiGo]
| $150 for <1 charge (98Wh) @ 1.3lbs
|
# Safe w/ BMS
# Lightweight
# Can be charged with LunaCycle charger
# Designed to be rugged
|
# Less than one charge
|}

You also need a way to charge your portable battery.
{| class="wikitable"
! Charger options
! Pros
! Cons
|-
| [https://lunacycle.com/36v-4amp-luna-mini-charger/ LunaCycle charger]
|
# Cheap ($60)
# Safe because it auto-shuts off
# XT60 connector
|
|-
| AC → DC charger
|
# Uses off the shelf power supply
|
# Requires [http://www.ebay.com/itm/12v-DC-Barrel-F-to-XT-60-M-Lipo-Battery-Charger-Power-Adapter-B5-/142329251634?_trksid=p2385738.m2548.l4275 DC Barrel to XT60 connector]
|-
| [https://hobbyking.com/en_us/accuell-s60-ac-charger-us-plug.html LiFePO4 charger]
|
# Cheap ($30)
|
|}

To be safe, buy a [http://amzn.to/2s2tXGy battery pouch] and only charge when you’re near the charger and awake.

=== Step 2: buy the other parts ===
# [http://amzn.to/2thPS8I Solar charge controller] - $40
[[File:charge_controller.png]]
# [https://lunacycle.com/batteries/connectors/xt60-set-connectors-with-pigtails/ 2x XT60 pigtails] - $3 each
[[File:xt60_pigtails.png]]
# [http://www.markertek.com/product/nc3fx/neutrik-nc3fx-female-3-pin-xlr-connector-nickel-silver XLR plug] - $3
[[File:xlr_plug.png]]

=== Step 3: configure the solar charge controller ===
The output of the solar charge controller must match the output of the Onewheel charger. Your settings should look something like the photo below.

[[File:controller_config.png]]

The critical settings are the 58V and 3.5A. Set the first line (where it says 32.5V) to the minimum voltage of your battery. 32V is generally a safe setting for a 36V-rated battery.

Remember! The battery pack should be on the solar panel label and OW on the battery label on the solar charge controller.

The manual can be found [http://www.mhinstek.com/pdf/User's%20manual%20of%20MPT-7210A.pdf here].

=== Step 4: solder the wires to the XLR plug ===
The Onewheel’s XLR plug requires a different wiring than the off-the-shelf XLR plugs. Unfortunately, that means you have to do some soldering.

Below is the correct configuration. Notice the positive wire is connected to *both* pins 2 and 3 of the XLR plug. If you want to verify this yourself, you can easily open the Onewheel charger’s XLR plug.

[[File:xlr_solder.png]]

=== Step 5: hook it all up! ===
Portable battery → male XT60 pigtail → solar charge converter → female XT60 pigtail → male XT60 pigtail → soldered XLR plug → (wait until voltage reaches 58V before plugging in!) Onewheel

Sometimes the OW does not go into its charge mode automatically. Simply press the power button in this case.

When you’re done charging, I suggest turning off the solar charge converter first before unplugging anything. Then disconnect the battery. Then unplug from Onewheel.

Charging Onewheel to 100% is safe. You’ll see the amps ramp down on the solar charge converter display as you enter “trickle charge” mode. But you’ll want to disconnect soon or it’ll just slowly drain your battery.