Onewheel.Wiki - User contributions [en]

Stands

2018-04-16T16:32:29Z

Jeffmccosker:

=== [https://onewheel.com/collections/accessories/products/onewheel-wave-stand Official "Wave" stand] ===

Slick looking stand. However, you may not have clearance if your board has float plates installed.

=== 3rd Party solutions ===

==== [https://www.amazon.com/s/ref=nb_sb_noss?url=node%3D486417011&field-keywords=folding+guitar+stand&rh=n%3A486417011%2Ck%3Afolding+guitar+stand Folding Guitar Stands @ Amazon] ====

==== [http://gregdigenti.bigcartel.com/product/silverstand SilverStand] ====
''Compatible with the Onewheel+ and original Onewheel.'' A laser-cut aluminum stand made specifically for the Onewheel that allows you display your board vertically. Allows for a smaller footprint than laying it on the ground, and prevents the black smudges on the wall which typically occur when propping it against the wall. (Created and assembled in the U.S. by Greg DiGenti.)

==== [https://craftandride.com/collections/frontpage/products/craft-ride-single-stand Craft&Ride Single Stand] ====

==== [https://craftandride.com/collections/frontpage/products/craft-ride-double-stand-for-onewheel Craft&Ride Double Board Stand] ====

==== [http://thefloat.life/product/tfl-foundation/ The Float Life Foundation] ====
[http://thefloat.life/product/onewheel-foundation-xtrarad-stand/ The Float Life XtraRad Stand]

==== [http://groovyruvy.bigcartel.com/ Groovyruvy's Black Steel and Aluminum Anchor Stands] ====

=== DIY ===
You can easily make a wooden stand like this one:
[[File:Wooded stand.jpg|left|thumb]]

It is made of hemlock fir. The bottom is 25cm and the height is 23cm.

The small piece on the front is glued from the t. op
[[Category:Accessories]]

Misc Accessories

2018-04-16T16:30:38Z

Jeffmccosker: Added new TFL Grip

= [https://craftandride.com/collections/onewheel-griptape Onewheel V1, Plus & XR Grip Tape] =
Craft&Ride's Onewheel V1, Plus & XR Grip Tape is the ideal addition to your Onewheel. With its silicon carbide composition, Craft&Ride's grip tape is cut to the exact specs of your stock Onewheel grip tape and features rock solid bonding to your Onewheel with ideal friction for your ride.

https://craftandride.com/collections/onewheel-griptape

The Float Life's TFL Grip is the only griptape specifically designed for the Onewheel. We found that the stock griptape that comes with your Onewheel doesn’t quite hold up to the type of floating we put our boards through on a daily basis. We tried some replacements, but regular skateboard grip tape ends up slippery and worn out after a half a trail ride, while Vicious is just a bit too gnarly and cuts up our hands and shoes. We developed TFL Griptape to be the first ever Onewheel specific griptape that’s a perfect happy medium! It’s coarse enough to keep your feet locked in, yet forgiving enough to allow for small foot adjustments and not shred you to pieces! We utilized a large durable aluminium oxide granule so it has no trouble standing up to a heavy wire brush cleaning without losing grip! Say goodbye to dirt-caked griptape forever! They come pre-cut so no razor blade needed and it’s as simple as peel and stick.

http://thefloat.life/product/tfl-griptape/

= [http://thefloat.life/product/float-sidekicks/ Float Sidekicks for Rail Protection] =
Float Sidekicks, by The Float Life, are the most optimal upgrade to the rails of your Onewheel. The Float Life is back to provide another opportunity to protect your Onewheel in style with Float Sidekicks - clean up and preserve the look of your Onewheel's rails.

http://thefloat.life/product/float-sidekicks/
[[Category:Accessories]]

== [http://www.markertek.com/product/ndm/neutrik-ndm-dummyplug-for-male-xlr-receptacles Charging Port Plugs] - $0.67/ea ==

This is a nice, small finishing touch to keep your charging port clean. Buy a bunch because sometimes they fall out.

== [http://www.markertek.com/product/ndf/neutrik-ndf-dummy-plug-for-female-xlr-receptacles Charger Cable Covers] - $0.67/ea ==

Less useful than above but still a nice touch to protect the end of your charger cable.

http://www.markertek.com/product/ndf/neutrik-ndf-dummy-plug-for-female-xlr-receptacles

== [https://craftandride.com/collections/frontpage/products/craft-ride-hover-enamel-pin Craft&Ride Enamel Pin] ==

Grip tape replacement

2018-04-16T16:26:06Z

Jeffmccosker: /* Recommended brands */

⚠️ WARNING: REPLACING THE GRIP TAPE WILL VOID YOUR [[Warranty|WARRANTY]].

Both the [[Original Onewheel]] and [[Onewheel+]] come with grip tape pre-installed. Whilst perfectly fine for casual use, serious riders will see great benefits from installing a coarser grit. The improved grip will result in better control and lesser chance of slipping off the board at higher speeds. Eventually your grip tape will wear out and you will need to replace it, or purchase new pads from FM if they ever become available.

=== Recommended brands ===
* [http://thefloat.life/product/tfl-griptape/ TFL Grip - Plus and XR Compatible] [http://thefloat.life/product/tfl-griptape/]
* [https://craftandride.com/collections/onewheel-griptape/products/onewheel-plus-griptape-in-black Onewheel Plus & XR Grip Tape in Black]
* [https://craftandride.com/collections/onewheel-griptape/products/onewheel-plus-griptape-in-blue Onewheel Plus & XR Grip Tape in Blue]
* [https://craftandride.com/collections/onewheel-griptape/products/onewheel-plus-griptape-in-camo Onewheel Plus & XR Grip Tape in Camo]
* [https://craftandride.com/collections/onewheel-griptape/products/onewheel-v1-griptape-in-black Onewheel V1 Grip Tape in Black]
* [https://craftandride.com/collections/onewheel-griptape/products/onewheel-v1-griptape-in-blue Onewheel V1 Grip Tape in Blue]
* Rayne Longboards Vicious GripTape (Coarse and Extra coarse)
* [https://www.amazon.com/gp/product/B01LZMMPKK/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1 Surf Traction Pad w/Kick] (recommended for rear pad)
* [https://www.amazon.com/gp/product/B00AOH3HD6/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1 Flat Traction pad] (recommended for front)

=== Instructions ===
# Use hairdryer to carefully warm up the surface
# Peel the grip tape back slowly (especially for the front pad).
## On the OW+, the front pad has a 100% coverage sensor which is inside a clear laminate. Do NOT attempt to peel up the laminate for any reason. (see picture)
# Trim the new tape to fit
#[[File:Griptape.jpg|left|thumb|Griptape Removal]][[File:Sensor.jpg|center|thumb|OW+ Sensor]]

[[Category:Mods]]