Difference between revisions of "Stands"

From Onewheel.Wiki
Jump to: navigation, search
Line 1: Line 1:
== <big>[https://craftandride.com/products/craft-ride-trunk-stand-for-onewheel Craft&Ride Trunk Stand]</big> ==
The Craft&Ride Trunk Stand is available now at '''https://craftandride.com/products/craft-ride-trunk-stand-for-onewheel'''
* The Craft&Ride Trunk Stand for Onewheel is the most functional and minimal stand for storing your Onewheel in the trunk of your vehicle. With its beautiful Baltic Birch wood construction, the Craft&Ride Trunk Stand is the best solution on the market for ensuring that your Onewheel does not tumble around your vehicle during transport.
<gallery>
Trunk stand 2 small new.png
Trunk stand 1 small.png
Trunk stand small.png
</gallery>
== <big>[https://craftandride.com/collections/onewheel-stands Craft&Ride Onewheel Stands]</big> ==
== <big>[https://craftandride.com/collections/onewheel-stands Craft&Ride Onewheel Stands]</big> ==
Onewheel Stands available now at '''https://craftandride.com/collections/onewheel-stands'''
Onewheel Stands available now at '''https://craftandride.com/collections/onewheel-stands'''

Revision as of 16:07, 27 September 2018

Craft&Ride Trunk Stand

The Craft&Ride Trunk Stand is available now at https://craftandride.com/products/craft-ride-trunk-stand-for-onewheel

  • The Craft&Ride Trunk Stand for Onewheel is the most functional and minimal stand for storing your Onewheel in the trunk of your vehicle. With its beautiful Baltic Birch wood construction, the Craft&Ride Trunk Stand is the best solution on the market for ensuring that your Onewheel does not tumble around your vehicle during transport.


Craft&Ride Onewheel Stands

Onewheel Stands available now at https://craftandride.com/collections/onewheel-stands



Official "Wave" stand

Slick looking stand. However, you may not have clearance if your board has float plates installed.

3rd Party solutions

Folding Guitar Stands @ Amazon

SilverStand

Compatible with the Onewheel+ and original Onewheel. A laser-cut aluminum stand made specifically for the Onewheel that allows you display your board vertically. Allows for a smaller footprint than laying it on the ground, and prevents the black smudges on the wall which typically occur when propping it against the wall. (Created and assembled in the U.S. by Greg DiGenti.)

Craft&Ride Single Stand

Craft&Ride Double Board Stand

The Float Life Foundation

The Float Life XtraRad Stand

Groovyruvy's Black Steel and Aluminum Anchor Stands

DIY

You can easily make a wooden stand like this one:

Wooded stand.jpg

It is made of hemlock fir. The bottom is 25cm and the height is 23cm.

The small piece on the front is glued from the t. op