View source for Tire replacement

⚠️ WARNING: REPLACING YOUR TIRE WILL VOID YOUR [[Warranty|WARRANTY]]. 

== Tires Known To Fit ==
{| class="wikitable"
!Brand
!Style
!Size
!Compounds
!Most Chosen Compound
!Recommended Skill Level
!Profile Summary
|-
|Vega
|Slick
|11.5x6.5-6
|ALL
|White
|Beginner
|Flat and wide with sharp edges. Easy to balance, rough ride, less grip off-road
|-
|Hoosier
|Slick
|11x6.0-6
|ALL
|A10
|Advanced
|Rounder than Vega. Easier/Smoother carving.
|-
|Hoosier
|Treaded
|11x6.5-6 (requires trimming)
|ALL
|D30A
|Advanced
|Rounder than Vega. Harder to balance at stop. Easier/Smoother carving.
|-
|Hoosier
|Treaded
|11x5.5-6
|ALL
|D30A
|Advanced
|Rounder than Vega. Hardest to balance at stop. Easier/Smoother carving.
|-
|Burris
|Treaded
|11x5.5-6
|ALL
|QRC33
|Advanced
|Rounder than Vega and narrower. Hardest to balance at stop. Easier/Smoother carving. Smoother and grippier ride off-road.
|}

== Tutorial ==
Start by removing this door on the bottom.. 2 Allen head screws..
<gallery>
1467844738207-img 20160706 183822.jpg
</gallery>

Next you will have to turn the plastic nut with red paint on it counter clockwise, then you will pull the plug out

<gallery>
1467847225990-img 20160706 191954.jpg
</gallery>

Next you will have to push the white clips down to unlock them, and then press in the black button and pull the harness out..
<gallery>
1467845155885-img 20160706 184338.jpg|
1467845172105-img 20160706 184401.jpg|
1467845198199-img 20160706 184420.jpg|
1467845325078-img 20160706 184815.jpg|
</gallery>

Next remove the 3 small Philips head screws on the bottom and the 3 retaining clips ..
<gallery>
1467845406430-img 20160706 184752.jpg
1467845445400-img 20160706 184722.jpg
1467845503448-img 20160706 185117.jpg
1467845462412-img 20160706 184734.jpg
1467845549288-img 20160706 185200.jpg
</gallery>

Now put your OW on its side with power button up.. remove the 2 Allen bolts.. flip the board and remove them on the other side..
<gallery>
1467845680537-img 20160706 185248.jpg
1467845710916-img 20160706 185307.jpg
</gallery>

Now your wheel should wiggle out..
<gallery>
1467845809558-img 20160706 185532.jpg
</gallery>

Now you will need a valve removal tool. Tire slime comes with one and I do suggest it. I will talk about that later on..
<gallery>
1467845913740-img 20160706 185547.jpg
1467845928260-img 20160706 185600.jpg
</gallery>

Time to remove the old tire.. it can be tricky by hand.. a set of tire spoons will help. Do not use screw drivers.. tire spoons are cheap .. or a local bike shop can do it.. but that's money were all trying to save.. if you get spoons try not to scratch up the inside of the rim because you don't want to leak air later on..

Also make sure when removing the tire the side with the air valve is up.. the tire ONLY comes off in one direction and installs the same way..
<gallery>
1467846265164-img 20160706 185931.jpg
1467846274740-img 20160706 185918.jpg
</gallery>

Done...
<gallery>
1467846439975-img 20160706 185950.jpg
</gallery>

----

I forgot to mention...buy a small 4oz bottle of tire slime for 6$... the factory used it and I also recommend it. tire was also bought from tsracing.com they are alot of help if you call.. they sell the Onewheel too so they know what tire you need..

I highly recommend the same tire.. DO NOT get a treaded tire.. it's dangerous because larger rocks can get jammed and end ending results would not be good.. there probably is a harder compound slick tire with the same size but i never checked. Also I highly recommend staying with vega tires because not all companies make them the exact same size even with the exact same number..

First hand experience with the Hoosier treaded D30A 11.0x6.5-6 nearly 400 miles on my v1. I don't have any problems with small or large rocks getting caught up and I ride gravel often enough to think it would have happened by now. In fact with the Vega tire I would occasionally have to stop to remove a stuck rock before it gouges the tire and I've never had to with the treaded. There are however clearance issues with the Hoosier above 15psi and I'm looking for a solution to that.   

[[Tire]]   
=== Videos ===

===== Full video from start to finish: =====
<youtube width="500">mvYwKyLpYgU</youtube>

===== Wheel removal: =====
<youtube width="500">euqGyf_DFT8</youtube> 

The plus is slightly different since it doesn't have a bolt through the axle. 

===== Tire removal: =====
{| class="wikitable"
|-
! Name !! Required Tools !! Instructional
|-
| Option 1 || || <youtube width="500">Tg6FTKliaWc<</youtube>
|-
| Option 2 || https://cometkartsales.com/RLV-Tire-Beadbreaker.html || <youtube width="500">https://www.youtube.com/watch?v=KgKncSWh-Fs</youtube>
|-
| Option 3 || || <youtube width="500">aZ72swxNCZU<</youtube>
|}

===== Tire mounting: =====
<youtube width="500">a9-hkj-g_0U</youtube>

<youtube width="500">0c-OoVNGVWk</youtube>

[[Category:Mods]]