Grip tape replacement

From Onewheel.Wiki
Revision as of 22:21, 20 June 2019 by Craftandride (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

⚠️ WARNING: REPLACING THE GRIP TAPE WILL VOID YOUR WARRANTY.

Both the Original Onewheel and Onewheel+ come with grip tape pre-installed. Whilst perfectly fine for casual use, serious riders will see great benefits from installing a coarser grit. The improved grip will result in better control and lesser chance of slipping off the board at higher speeds. Eventually your grip tape will wear out and you will need to replace it, or purchase new pads from FM if they ever become available.

Craft&Ride Grip Tape for Onewheel

Grip Tape for Onewheel+ and Onewheel+ XR is available now at https://craftandride.com/collections/onewheel-griptape

  • Pre-cut and ready to stick
  • Available in Black, Blue, and Camo

Grip Tape for Original Onewheel is available now at https://craftandride.com/collections/onewheel-griptape

  • Pre-cut and ready to stick
  • Available in Black and Blue



Recommended brands

Instructions

  1. Use hairdryer to carefully warm up the surface
  2. Peel the grip tape back slowly (especially for the front pad).
    1. On the OW+, the front pad has a 100% coverage sensor which is inside a clear laminate. Do NOT attempt to peel up the laminate for any reason. (see picture)
  3. Trim the new tape to fit
  4. Griptape Removal
    OW+ Sensor